Honda Accord 2008 Manual page 2269

07/11/02 09:37:15 61TA0000_220_0239
Interior Lights
Interior Light Switch Test/
Replacement
With moonroof
NOTE: The interior light switch is built into the
moonroof switch, and it switches the front individual
map light OFF and DOOR positions.
1. Remove the front individual map lights (see page
22-234).
2. Disconnect the moonroof switch 12P connector (A)
and the map light 3P connector (B).
＊０１
3. Remove the moonroof switch (C) from the map
light housing.
4. At the moonroof switch 12P connector, check for
continuity between the No. 9 and No. 7 terminals.
• There should be continuity when the interior light
switch is in the DOOR position.
• There should be no continuity when the interior
light switch is in the OFF position.
5. If the continuity is not as specified, replace the
moonroof switch assembly.
6. Install the parts in the reverse order of removal.
22-236 22-236
ＴＡ０８ＡＢ９Ｊ３２３０００３５０６１ＦＨＡＴ００
B
A
C
Ambient Light Replacement
With moonroof
NOTE: The ambient light is built into the moonroof
switch.
1. Remove the front individual map lights (see page
22-234).
2. Disconnect the moonroof switch 12P connector (A)
and the map light 3P connector (B).
B
C
3. Remove the moonroof switch (C) from the map
light housing.
4. At the moonroof switch 12P connector, check the
light by connecting battery power to the No. 3
terminal and ground to the No. 1 terminal. The
ambient light should come on. If the light does not
come on, replace the moonroof switch assembly.
5. Install the parts in the reverse order of removal.
ＴＡ０８ＡＢ９Ｊ３２３０００１２９３２ＫＢＡＴ００
A
＊０１