Honda Accord 2008 Manual page 2441

07/11/02 09:44:36 61TA0000_220_0411
Immobilizer System
Immobilizer-keyless Control Unit Input Test
NOTE: Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test
Mode A (see page 22-120).
1. Remove the dashboard lower cover (see page 20-152).
2. Remove the steering column covers (see page 20-167).
3. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).
＊０１
4. Inspect the connector and socket terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
• If the terminals look OK, go to step 5.
22-408
ＴＡ０８Ａ００Ｊ４６６３６２３４５２５ＦＣＡＴ００
VBU (WHT)
Wire side of
female terminals
IG1
(YEL)
B-CAN LO IMOCD (S-NET)
B-CAN HI
(BLU) (PNK) (LT GRN)
B
A
LG (BRN)