Honda Accord 2008 Manual page 2238

07/11/02 09:36:29 61TA0000_220_0208
MICU Input Test
NOTE:
• Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test Mode A
(see page 22-120).
• Before testing, make sure the No. 15 (7.5 A) fuse in the driver's under-dash fuse/relay box is OK.
Driver's MICU
1. Turn the ignition switch to LOCK (0), and remove the driver's dashboard lower cover.
2. Disconnect driver's under-dash fuse/relay box connectors B, D, F, Q, and R.
NOTE: All connector views are wire side of female terminals.
＊０１
3. Inspect the connector and socket terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
• If the terminals look OK, go to step 4.
ＴＡ０８Ａ００Ｊ３２１０００４１９５３ＦＣＡＴ００
CONNECTOR B (2P)
BLU
CONNECTOR D (16P)
RED BRN
CONNECTOR F (33P)
RED WHT WHT/RED
RED/YEL
CONNECTOR Q (20P)
BLK
CONNECTOR R (24P)
BRN BLK BLK
BLU BLK/RED
GRN
BRN
WHT
RED GRY BRN
LT BLU
GRN
(cont'd)
22-205