Honda Accord 2008 Manual page 2209

07/11/02 09:35:04 61TA0000_220_0179
Keyless/Power Door Locks/Security System
Transmitter Test (cont'd)
7. Use a different known-good keyless transmitter
assembly and repeat steps 3 and 4.
NOTE: The keyless transmitter does not need to be
programmed to the vehicle for this test.
• If (DIFFERENT) KEYLESS ENTRY TRANSMITTER
CODE IS RECEIVED is indicated, replace the
keyless transmitter and do the immobilizer
system registration (see page 22-410).
• If KEYLESS ENTRY TRANSMITTER CODE IS NOT
RECEIVED is indicated, the immobilizer-keyless
control unit is faulty, replace it and do the
immobilizer system registration (see page
22-410).
NOTE: The keyless transmitter is combined with
the immobilizer transponder, so when the
transponder is registered by the HDS, the keyless
transmitter programming is completed
automatically.
22-176
Without HDS
1. Start the engine.
• If the engine does not start, go to the immobilizer
system troubleshooting (see page 22-402).
• If the engine starts, go to step 2.
2. Press the lock or unlock button five or six times to
reset the transmitter.
• If the locks work, the transmitter is OK.
• If the locks don't work, go to step 3.
3. Open the transmitter, and check for water damage.
• If you find any water damage, replace the
transmitter.
• If there is no water damage, go to step 4.
＊０３