Brake Hose And Line Inspection - Honda Accord 2008 Manual

07/11/02 09:32:47 61TA0000_190_0038
Conventional Brake Components

Brake Hose and Line Inspection

1. Inspect the brake hoses for damage, deterioration, leaks, interference, and twisting.
2. Check the brake lines for damage, rusting, and leaks. Also check for bent brake lines.
3. Check for leaks at hose and line joints and connections, and retighten if necessary.
4. Check the master cylinder and the VSA modulator-control unit for damage and leaks.
Connection
＊０１
19-38
ＴＡ０８Ａ００Ｄ１４３０００１４７５１ＭＡＡＴ００
Component
Point
A Front brake caliper
B Rear brake caliper
C Brake hose
D Master cylinder
E VSA modulator-control unit
D
E
A C
Connected to Specified Torque Value
Brake hose 35 N·m (3.6 kgf·m, 26 lbf·ft)
Bleed screw 9 N·m (0.9 kgf·m, 7 lbf·ft)
(NISSIN type)
Bleed screw 8 N·m (0.8 kgf·m, 6 lbf·ft)
(AKEBONO type)
Brake hose 35 N·m (3.6 kgf·m, 26 lbf·ft)
Bleed screw 9 N·m (0.9 kgf·m, 7 lbf·ft)
Brake line 15 N·m (1.5 kgf·m, 11 lbf·ft)
Brake line 22 N·m (2.2 kgf·m, 16 lbf·ft)
Brake line 15 N·m (1.5 kgf·m, 11 lbf·ft)
(10 mm nut)
Brake line 22 N·m (2.2 kgf·m, 16 lbf·ft)
(12 mm nut)
A
C
Note
Banjo bolt
Banjo bolt
Flare nut
Flare nut
Flare nut
B
C
B