Honda Accord 2008 Manual page 2415

07/11/02 09:43:53 61TA0000_220_0385
Power Lumbar Support
Switch Test/Replacement
1. Separate the lumbar support switch cover (A) from
the switch (B).
＊０１
A
2. Disconnect the 5P connector (C) from the switch.
3. Check for continuity between the terminals in each
switch position according to the table.
＊０２
Position
4. If the continuity is not as specified, replace the
switch.
22-382 22-382
ＴＡ０８Ａ００Ｊ４６１２７０３７９０５ＦＨＡＴ００
B
Terminal
1 2 3
Forward
Backward
Motor Test
1. Remove the front seat-back cover (see page 20-204),
and seat-back pad (see page 20-187).
2. Disconnect the 2P connector (A) from the lumbar
support motor (B).
C
Terminal side of male termials
4 5
3. Test the motor by applying battery power and body
ground to the terminals.
Position
Forward
Backward
4. If the motor does not run or fails to run smoothly,
replace it (see page 20-187).
ＴＡ０８Ａ００Ｊ４６１２７０３７９０３ＦＥＡＴ００
Terminal
1
＊０１
B
A
＊０２
2