Honda Accord 2008 Manual page 2364

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 09:41:46 61TA0000_220_0334
Rewriting the ODO Data and Transferring the Maintenance Minder Data to a
New Gauge Control Module
NOTE:
• Obtain a new gauge control module before starting
the rewriting process.
• Rewriting is not possible on a gauge control module
that will not communicate with the HDS.
• Make sure that the HDS shows the correct VIN for the
vehicle you are working on.
• Once you have started this procedure, you must
complete it before removing the HDS from the DLC.
• Connect a battery jumper box (not a battery charger)
to insure that correct battery voltage will be
maintained.
1. Before replacing the gauge control module,
connect the HDS.
2. Select GAUGES from the BODY ELECTRICAL
system select menu with the HDS.
3. Select Gauge Control Module Replacement (ODO
Rewrite) from the ADJUSTMENT menu, and follow
the instructions on the display to retrieve the ODO
value and the Maintenance Minder Information.
4. Replace the gauge control module.
5. Follow the instructions on the display to write the
new ODO value and Maintenance Minder Data to
the new gauge control module. If the data transfer
fails, refer to the instructions below to release the
locked ODO value.
Release Locked odometer mileage to the
original gauge control module.
If, after you attempt to transfer mileage, the odometer
display has dashes (
incorrect value, the original gauge control module
needs to be unlocked and restored to its original state:
1. Confirm that you have the latest HDS version of
software.
2. Make sure that the HDS shows the correct VIN for
the vehicle you are working on.
−−−
), is garbled, or shows an
3. With the ignition switch in LOCK (0), reconnect the
original gauge control module.
4. Completely re-boot the HDS.
5. Clear any stored DTCs.
6. Navigate to Body Electric/Gauges/Adjustment/
Instrument Panel Replacement.
7. Select 3. Releasing Locked ODO Value.
8. Follow the prompts and the odometer mileage will
be restored.
9. Start over and make sure the screen prompts are
followed.
TA08A00J22100030053BBAT01
22-331

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents