Honda Accord 2008 Manual page 2243

07/11/02 09:36:30 61TA0000_220_0213
Exterior Lights
Combination Light Switch Test/Replacement
1. Remove the dashboard lower cover (see page 20-152).
2. Remove the steering column covers (see page 17-28).
3. Disconnect the 12P connector (A) from the combination light switch (B).
＊０１
4. Remove the two screws, then slide out the combination light switch.
5. Inspect the connector terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
• If the terminals look OK, check for continuity between the terminals in each switch position according to the
tables.
＊０２
Light switch
Position
Turn signal switch
Position
6. If the continuity is not as specified, replace the switch.
22-210
ＴＡ０８Ａ００Ｊ３２１０００１７１０１ＦＨＡＴ００
Terminal side of male terminals
Terminal
OFF
Headlight
switch
LOW
HIGH
OFF
Passing
switch
ON
Terminal
LEFT
Neutral
RIGHT
A
4 6 9 10
1 2 12
B
11 12