Honda Accord 2008 Manual page 1722

07/11/02 09:34:16 61TA0000_200_0155
Driver's Outer Dashboard Trim
Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
NOTE:
• Take care not to scratch the dashboard and its related
parts.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
1. Remove the driver's outer dashboard trim (A).
–1 Using the appropriate trim tool, pry up on the
–2 Detach the clips.
＊０１
Fastener Locations
: Clip, 3
2. Install the trim in the reverse order of removal, and
note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips into place securely.
ＴＡ０８Ａ００Ｊ２６２２０２１９３６５ＫＤＡＴ０１
edge of the trim at the steering column side.
Driver's Inner Dashboard Trim
Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
NOTE:
• Take care not to scratch the dashboard and its related
parts.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
1. Remove the driver's inner dashboard trim (A).
–1 Using the appropriate trim tool, pry up on the
edge of the trim at the steering column side.
–2 Detach the clips.
–3 Release the hook (B) from under the center
panel (C).
Fastener Locations
: Clip, 2
A
B
2. Install the trim in the reverse order of removal, and
note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• First insert the hook under the center panel, then
push the clips into place securely.
ＴＡ０８Ａ００Ｊ２６２２０２１９３６５ＫＤＡＴ１０
A
C
20-153 20-153
＊０２