Honda Accord 2008 Manual page 2432

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 09:44:34 61TA0000_220_0402
DTC U1282:
Immobilizer-keyless Control Unit
Lost Communication with Driver's MICU
NOTE: If you are troubleshooting multiple DTCs, be
sure to follow the instructions in B-CAN System
Diagnosis Test Mode A (see page 22-120).
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0) and then back
to ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.
Is DT C U1282 indicated?
YES
Go to the driver's MICU input test, and do all
power, ground, and communication input tests
(see page 22-138). If the tests prove OK, replace the
driver's under-dash fuse/relay box.
NO
Intermittent failure, the system is OK at this
time. Check for loose or poor connections at driver's
under-dash fuse/relay box connector P (20P) and
the related units.
TA08A00K742000U1282FAAT00
22-399

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents