Figure 1-11 Removing The Ons 15454 Ansi Front Door - Cisco ONS 15454 Series Procedure Manual

Required Tools and Equipment (ETSI)
Figure 1-11
Assembly hinge pin
Return to your originating procedure (NTP).
Step 3
NTP-G4 Open and Remove the FMEC Cover (ETSI Only)
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Complete the
Step 2
Step 3 Continue with the
page
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
1-26
Removing the ONS 15454 ANSI Front Door
Translucent
circles
for LED
viewing
Door hinge
Assembly hinge
"DLP-G11 Open the FMEC Cover" task on page
"DLP-G12 Remove the FMEC Cover" task on page
"NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only)" procedure on
1-31.
F A N
F A IL
C R
IT
M A
J
M IN
This procedure opens and removes the FMEC cover on the
ONS 15454 ETSI. The ONS 15454 ETSI has a screw-in panel over the
EFCA. The FMEC cover protects the FMEC cards.
Medium slot-head screwdriver
NTP-G306 Install the ONS 15454 Shelf Assembly, page 1-8
Required
Onsite
None
Chapter 1 Install the Cisco ONS 15454 Shelf Assembly
1-27.
1-28.
78-19286-01