Cisco ONS 15454 Series Procedure Manual page 28

Contents
Upgrade, Add, and Remove Cards and Nodes
14
C H A P T E R
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
xxviii
DLP- G413 Change 40-WXC-C or 80-WXC-C Card WXC Line Parameters
DLP- G429 Multiplex a Single Wavelength on 40-WXC-C Card
NTP- G241 Modify the 40-SMR1-C and 40-SMR2-C Line Settings and PM Thresholds
DLP- G532 Change Optical Line Settings for 40-SMR1-C and 40-SMR2-C Cards
DLP- G533 Change Optical Line Threshold Settings for 40-SMR1-C and 40-SMR2-C Cards
DLP- G534 Change Optical Amplifier Line Settings for 40-SMR1-C and 40-SMR2-C Cards
DLP- G535 Change Optical Amplifier Threshold Settings for 40-SMR1-C and 40-SMR2-C
Cards
13-100
DLP- G536 Change 40-SMR1-C and 40-SMR2-C Card Optical Channel Parameters
DLP- G537 Change the 40-SMR1-C and 40-SMR2-C Optical Channel Thresholds
NTP- G149 Modify the MMU Line Settings and PM Thresholds
DLP- G342 Change MMU Optical Line Parameters
DLP- G343 Change the MMU Optical Line Thresholds
NTP- G101 Modify Alarm Interface Controller–International Settings
DLP- G245 Change External Alarms Using the AIC-I Card
DLP- G246 Change External Controls Using the AIC-I Card
DLP- G247 Change AIC-I Card Orderwire Settings
NTP- G102 Change Card Service State
NTP- G280 Modify Threshold Settings for the TNC Card
DLP- G609 Modify Optical Threshold Settings for the TNC Card
DLP- G610 Modify Line Threshold Settings for the TNC Card
Before You Begin
14-1
NTP- G107 Remove Permanently or Remove and Replace DWDM Cards
DLP- G254 Place Amplifier Ports Out of Service
DLP- G318 Place Amplifier Ports In Service
NTP- G127 Add an AD-xC-xx.x Card to an OADM Node
NTP- G129 Add a DWDM Node
NTP- G130 Remove a DWDM Node
NTP- G146 Add a Rack, Passive Unit, or Shelf to a Multishelf Node
NTP- G147 Delete a Passive Unit, Shelf, or Rack from a Multishelf Node
NTP- G173 Convert an OADM Node to a ROADM Node
NTP- G176 Convert an Line Amplifier Node to an OADM Node
NTP- G182 Convert a Line Amplifier Node to a ROADM Node
NTP- G195 Convert a Protected ROADM Node from two Separate Nodes to a Single Multishelf
Node
14-24
NTP- G177 Upgrade ANS Parameters on a DWDM Node
13-111
13-113
13-117
13-117
13-118
14-1
14-4
14-5
14-6
14-9
14-11
14-17
14-31
13-88
13-90
13-91
13-92
13-105
13-107
13-111
13-114
13-115
13-116
13-119
13-120
14-2
14-13
14-15
14-20
14-22
13-94
13-98
78-19286-01