Cisco ONS 15454 Series Procedure Manual page 77

DLP-G527 Modify the CD Value of the TDC-CC and TDC-FC cards When Connected to OPT-RAMP-C and
DLP-G248 Use the Reinitialization Tool to Clear the Database and Upload Software (Windows)
DLP-G249 Use the Reinitialization Tool to Clear the Database and Upload Software (UNIX)
DLP-G298 View IS-IS Routing Information Base
DLP-G299 View ES-IS Routing Information Base
DLP-G300 Manage the TARP Data Cache
DLP-G250 Reset the TCC2/TCC2P/TCC3/TNC/TSC Card
DLP-G251 Reset DWDM Cards Using CTC
DLP-G259 Manual or Force Switch the Node Timing Reference
DLP-G260 Clear a Manual or Force Switch on a Node Timing Reference
DLP-G261 Clean Multi Fiber-Optic Cable Connectors
DLP-G262 Clean Fiber Connectors with CLETOP
DLP-G263 Clean the Fiber Adapters
DLP-G517 Create an Ingress Policy on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE cards Using PCLI
DLP-G518 Create a Egress Policy on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G519 Create a Service Instance Policy on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G520 Apply an Ingress Policy to a Port on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G521 Apply an Egress Policy to a Port on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G522 Apply a Service Instance Policy to a Port on GE_XPE or 10GE_XPE Cards Using PCLI
DLP-G619 Create a Channel Group on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G620 Add Ports to a Channel Group on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using
DLP-G643 Enable EFM on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G644 Configure the EFM Mode on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G635 Enable CFM on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G636 Create a Maintenance Domain on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using
DLP-G637 Create a Maintenance Intermediate Point on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards
DLP-G638 Create a Maintenance End Point on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using
DLP-G649 Create a Segment on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G650 Configure STCN on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using PCLI
DLP-G651 Configure Preemption Delay on the Primary Edge Port Using PCLI
DLP-G652 Configure VLAN Load Balancing on the Primary Edge Port Using PCLI
78-19286-01
OPT-RAMP-CE Amplifiers
15-12
15-14
15-32
PCLI
B-25
PCLI
B-29
Using PCLI
B-30
PCLI
B-31
14-33
15-10
15-11
15-13
15-18
15-19
15-31
15-32
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
Contents
15-6
15-8
B-4
B-5
B-9
B-24
B-26
B-27
B-29
B-33
B-34
B-35
B-35
lxxvii
B-7
B-8
B-9