Cisco ONS 15454 Series Procedure Manual page 14

Dwdm
Hide thumbs Also See for ONS 15454 Series:
Table of Contents

Advertisement

Contents
Provision Transponder and Muxponder Cards
7
C H A P T E R
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
xiv
DLP- G89 Verify OADM Node Pass-Through Channel Connections
DLP- G92 Verify 4MD-xx.x Pass-Through Connection Power
DLP- G90 Verify an AD-xB-xx.x Pass-Through Connection Power
DLP- G91 Verify an AD-xC-xx.x Pass-Through Connection
DLP- G84 Verify the OSC-CSM Incoming Power
DLP- G93 Verify Add and Drop Connections on an OADM Node with OSCM Cards
NTP- G49 Perform the Active OADM Node Acceptance Test on a Symmetric Node with OSC-CSM
Cards
6-140
DLP- G86 Verify Express Channel Connections on an OADM Node with OSC-CSM Cards
DLP- G83 Verify the OSC-CSM Power on OADM Nodes
DLP- G94 Verify Add and Drop Connections on an OADM Node with OSC-CSM Cards
NTP- G50 Perform the Passive OADM Node Acceptance Test on a Symmetric Node with OSC-CSM
Cards
6-146
NTP- G186 Perform the Four-Degree and Eight-Degree Mesh Patch Panel Acceptance Test
DLP- G432 Set the Transponder Wavelength
DLP- G433 Record Transponder Optical Power
NTP- G187 Perform the Multiring Site Acceptance Test
DLP- 434 Record the OPT-AMP-17-C Power Value
DLP- 435 Set the 40-WXC-C OCHNC Parameters
DLP- 436 Record the 40-WXC-C Power Value
NTP- G188 Perform the Native Mesh Node Acceptance Test
NTP- G189 Perform the Node Upgrade Acceptance Test
NTP- G243 Perform the Two-Degree ROADM Node with 40-SMR-1-C and OPT-AMP-17-C Cards
Acceptance Test
6-181
NTP- G244 Perform the Four Degree ROADM Node with 40-SMR-2-C Cards Acceptance Test
Before You Begin
7-1
NTP- G128 Manage Pluggable Port Modules
DLP- G235 Change the 2.5G Data Muxponder Card Mode
DLP- G332 Change the 10G Data Muxponder Port Mode
DLP- G379 Change the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Card Mode
DLP- G411 Provision an ADM-10G PPM and Port
DLP- G452 Change the OTU2_XP Card Mode
DLP- G277 Provision a Multirate PPM
DLP- G274 Verify Topologies for ETR_CLO and ISC Services
DLP- G278 Provision the Optical Line Rate
DLP- G280 Delete a PPM
NTP- G33 Create a Y-Cable Protection Group
6-137
6-158
6-159
6-160
6-165
6-166
6-167
6-173
7-1
7-3
7-8
7-9
7-10
7-13
7-18
7-19
6-133
6-134
6-135
6-136
6-138
6-143
6-168
7-4
7-5
7-7
7-11
6-142
6-144
6-148
6-185
78-19286-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ons 15454Ons 15454 m2Ons 15454 m6

Table of Contents