Cisco ONS 15454 Series Procedure Manual page 50

Procedures
NTP-G270 Open and Remove the Front Door of the ONS 15454 M2 Shelf Assembly
NTP-G267 Install the Power Module in the ONS 15454 M2 Shelf Assembly
NTP-G268 Install the Fan-Tray Assembly in the ONS 15454 M2 Shelf Assembly
NTP-G271 Install the Power and Ground to the ONS 15454 M2 Shelf Assembly
NTP-G291 Attach Wires to Timing, LAN, and Craft Pin Connections in ONS 15454 M2
NTP-G313 Install and Configure the TNC or TSC Card
NTP-G269 Install the Front Door of the ONS 15454 M2 Shelf Assembly
NTP-G275 Perform the ONS 15454 M2 Shelf Installation Acceptance Test
NTP-G251 Unpack and Inspect the ONS 15454 M6 Shelf Assembly
NTP-G252 Install the ONS 15454 M6 Shelf Assembly
NTP-G259 Open and Remove the Front Door of the ONS 15454 M6 Shelf Assembly
NTP-G253 Install the External Connection Unit (ECU)
NTP-
NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf Assembly
NTP-G255 Install the LCD Module in the ONS 15454 M6 Shelf Assembly
NTP-G256 Install Power and Ground to the ONS 15454 M6 Shelf Assembly
NTP-G257 Install the Fan-Tray Assembly in the ONS 15454 M6 Shelf Assembly
NTP-G312 Attach Wires to Alarm, Timing, LAN, and Craft Pin Connections in Cisco ONS 15454 M6
NTP-G308 Connect the ONS 15454 M6 Multishelf Node and the ONS 15454 M6 Subtending Shelves
NTP-G309 Connect the ONS 15454 M6 and the ONS 15454 in a Mixed Multishelf Configuration
NTP-G310 Upgrade the ONS 15454 Multishelf Configuration using the ONS 15454 M6
NTP-G258 Install the Front Door of the ONS 15454 M6 Shelf Assembly
NTP-G264 Perform the ONS 15454 M6 Shelf Installation Acceptance Test
NTP-G17 Set Up Computer for CTC
NTP-G18 Set Up CTC Computer for Local Craft Connection to the ONS 15454
NTP-G19 Set Up a CTC Computer for a Corporate LAN Connection to the ONS 15454
NTP-G21 Log into the GUI
NTP-G190 Use the CTC Launcher Application to Manage Multiple ONS Nodes
NTP-G139 Verify Cisco TransportPlanner Reports and Files
NTP-G22 Verify Common Card Installation
NTP-G250 Verify Digital Image Signing (DIS) Information
NTP-G144 Provision a Multishelf Node
NTP-G23 Create Users and Assign Security
NTP-G24 Set Up Name, Date, Time, and Contact Information
NTP-G25 Set Battery Power Monitor Thresholds
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
l
G290 Install the Cable and Fiber Modules
4-2
4-28
5-7
5-10
5-12
2-30
2-60
2-65
2-67
3-6
3-8
3-34
3-36
3-44
3-82
3-84
5-3
5-8
5-15
5-17
2-26
2-34
2-37
2-53
3-29
3-39
3-47
3-62
3-64
3-69
3-71
3-77
4-9
4-25
4-38
78-19286-01