Cisco ONS 15454 Series Procedure Manual page 66

Tasks
DLP-436 Record the 40-WXC-C Power Value
DLP-G235 Change the 2.5G Data Muxponder Card Mode
DLP-G332 Change the 10G Data Muxponder Port Mode
DLP-G379 Change the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Card Mode
DLP-G411 Provision an ADM-10G PPM and Port
DLP-G452 Change the OTU2_XP Card Mode
DLP-G277 Provision a Multirate PPM
DLP-G274 Verify Topologies for ETR_CLO and ISC Services
DLP-G278 Provision the Optical Line Rate
DLP-G280 Delete a PPM
DLP-G461 Create a 1+1 Protection Group for GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards
DLP-G229 Change the 2.5G Multirate Transponder Card Settings
DLP-G230 Change the 2.5G Multirate Transponder Line Settings
DLP-G231 Change the 2.5G Multirate Transponder Line Section Trace Settings
DLP-G367 Change the 2.5G Multirate Transponder Trunk Wavelength Settings
DLP-G232 Change the 2.5G Multirate Transponder SONET or SDH Line Threshold Settings
DLP-G320 Change the 2.5G Multirate Transponder Line RMON Thresholds for 1G Ethernet or 1G FC/FICON
DLP-G305 Provision the 2.5G Multirate Transponder Trunk Port Alarm and TCA Thresholds
DLP-G306 Provision the 2.5G Multirate Transponder Client Port Alarm and TCA Thresholds
DLP-G234 Change the 2.5G Multirate Transponder OTN Settings
DLP-G365 Provision the TXP_MR_10G Data Rate
DLP-G216 Change the 10G Multirate Transponder Card Settings
DLP-G217 Change the 10G Multirate Transponder Line Settings
DLP-G218 Change the 10G Multirate Transponder Line Section Trace Settings
DLP-G368 Change the 10G Multirate Transponder Trunk Wavelength Settings
DLP-G219 Change the 10G Multirate Transponder Line Thresholds for SONET or SDH Payloads Including 10G
DLP-G319 Change the 10G Multirate Transponder Line RMON Thresholds for 10G Ethernet LAN Phy
DLP-G301 Provision the 10G Multirate Transponder Trunk Port Alarm and TCA Thresholds
DLP-G302 Provision the 10G Multirate Transponder Client Port Alarm and TCA Thresholds
DLP-G221 Change the 10G Multirate Transponder OTN Settings
DLP-G403 Create the ADM-10G Peer Group
DLP-G469 Provision the ADM-10G Card Ethernet Settings
DLP-G397 Change the ADM-10G Line Settings
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
lxvi
6-167
7-9
7-10
7-13
7-18
Payloads
7-37
Ethernet WAN Phy
7-57
Payloads
7-60
7-73
7-74
7-4
7-5
7-8
7-11
7-28
7-29
7-44
7-48
7-49
7-51
7-67
7-74
7-7
7-26
7-32
7-33
7-34
7-38
7-40
7-54
7-56
7-64
7-65
78-19286-01