Required Tools and Equipment (ETSI)
Figure 1-18
To verify that the tray has plugged into the assembly, look at the fan tray and listen to determine that the
Step 3
fans are running.
Step 4
If you want to install an alarm expansion panel on the ONS 15454 ANSI shelf, continue with the
"NTP-G9 Install the Alarm Expansion Panel (ANSI Only)" procedure on page
with the
page
Stop. You have completed this procedure.
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
1-44
Installing the Fan-Tray Assembly on the ONS 15454 ANSI
LCD
"NTP-G10 Attach Wires to Alarm, Timing, LAN, and Craft Pin Connections" procedure on
1-48.
Chapter 1
Fan tray
assembly
Install the Cisco ONS 15454 Shelf Assembly
1-45. Otherwise, continue
78-19286-01