Cisco ONS 15454 Series Procedure Manual page 11

NTP- G179 Install the TXP, MXP, GE_XP, 10GE_XP, GE_XPE, 10GE_XPE, ADM-10G, and OTU2_XP
Cards
NTP- G123 Install the Filler Cards
NTP- G239 Add and Delete Passive Units
NTP- G34 Install Fiber-Optic Cables on DWDM Cards and DCUs
NTP- G140 Install Fiber-Optic Cables Between Terminal, Hub, or ROADM Nodes
NTP- G185 Install Fiber-Optic Cables between Mesh Nodes
NTP- G191 Install Fiber-Optic Cables on Passthrough ROADM Nodes
NTP- G141 Install Fiber-Optic Cables for Y-Cable Protection Modules
NTP- G152 Create and Verify Internal Patchcords
NTP- G242 Create an Internal Patchcord Manually
78-19286-01
5-64
DLP- G63 Install an SFP or XFP
DLP- G273 Preprovision an SFP or XFP Slot
DLP- G64 Remove an SFP or XFP
DLP- G543 Add Passive Units Manually
DLP- G544 Delete a Passive Unit
DLP- G349 Use the Cisco TransportPlanner Internal Connections Report
DLP- G315 Install Fiber-Optic Cables From the 32WSS/32DMX and 32MUX-O/32DMX-O Cards to the
Standard Patch Panel Tray
DLP- G316 Install Fiber-Optic Cables from TXP, MXP, GE_XP, 10GE_XP, GE_XPE, 10GE_XPE,
ADM-10G, or OTU2_XP Cards to the Standard Patch Panel Tray
DLP- G356 Install Fiber-Optic Cables from the 32WSS/32DMX and 32MUX-O/32DMX-O Cards to the
Deep Patch Panel Tray
5-85
DLP- G427 Reroute Fiber-Optic Cables in the 40-Channel Patch Panel Tray
DLP- G428 Install Fiber-Optic Cables from the 40-WSS-C/40-WSS-CE and 40-DMX-C/40-DMX-CE
Cards in an Expanded ROADM, Terminal, or Hub Node to the 40-Channel Patch Panel Tray
DLP- G357 Install Fiber-Optic Cables from the TXP, MXP, GE_XP, 10GE_XP, GE_XPE, 10GE_XPE,
ADM-10G, or OTU2_XP Cards to the Deep Patch Panel Tray or 40-Channel Patch Panel Tray
DLP- G530 Install Fiber-Optic Cables from the 40-SMR1-C, 40-SMR2-C, or 80-WXC-C Cards in a
ROADM, Terminal, or Hub Node to the 15216-MD-40-ODD or 15216-MD-40-EVEN Patch Panel
Tray
5-93
DLP- G430 Install Fiber-Optic Cables from the 40-MUX-C and 40-DMX-C Cards in a Mesh Node to the
40-Channel Patch Panel Tray
DLP- G431 Install Fiber-Optic Cables from the 40-WXC-C, or 40-SMR2-C Cards in a Mesh Node to a
Mesh Patch Panel Tray
5-98
DLP- G375 Install Fiber-Optic Cables on the Y-Cable Modules in the FlexLayer Shelf
DLP- G376 Install Fiber-Optic Cables on the Y-Cable Modules in the Y-Cable Module Tray
DLP- G354 Create an Internal Patchcord Manually Using the Trunk to Trunk (L2) Option
DLP- 547 Create an Internal Patchcord Manually Using the OCH-Trunk to OCH-Filter Option
DLP- 548 Create an Internal Patchcord Manually Using the OCH-Filter to OCH-Filter Option
DLP- 549 Create an Internal Patchcord Manually Using the OTS to OTS Option
5-67
5-68
5-69
5-70
5-71
5-72
5-72
5-80
5-96
5-107
5-108
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
5-73
5-75
5-77
5-84
5-88
5-95
5-99
5-102
5-113
Contents
5-90
5-92
5-103
5-104
5-109
5-110
5-111
xi