Cisco ONS 15454 Series Procedure Manual page 69

DLP-G642 Enable Remote Loopback for Each Port Using CTC
DLP-G645 Create a Segment Using CTC
DLP-G646 Edit a Segment Using CTC
DLP-G647 Activate VLAN Load Balancing Using CTC
DLP-G648 Deactivate VLAN Load Balancing Using CTC
DLP-G380 Provision the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Card Ethernet Settings
DLP-G684 Provision the GE_XPE Card PDH Ethernet Settings
DLP-G685 Provision the GE_XPE Card Electrical Lines Settings
DLP-G381 Provision the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Layer 2 Protection Settings
DLP-G507 Enable a Different GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Card as the Master Card
DLP-G382 Add and Remove SVLANS to/from GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE NNI Ports
DLP-G383 Provision the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Quality of Service Settings
DLP-G470 Provision the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Class of Service (CoS) Settings
DLP-G384 Provision the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE QinQ Settings
DLP-G221 Enable MAC Address Learning on SVLANs for GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE
DLP-G460 Enable MAC Address Learning on SVLANs for GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using
DLP-G385 Provision the MAC Filter Settings for GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Card
DLP-G546 View Card MAC Addresses on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards
DLP-G509 Enable Link Integrity on GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards Using CTC
DLP-G515 Provision SVLAN Rate Limiting on the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Card Using
DLP-G471 Create a SVLAN or CVLAN Profile
DLP-G511 Enable IGMP Snooping, IGMP Fast Leave and IGMP Report Suppression on GE_XP, 10GE_XP,
DLP-G513 Enable MVR on a GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Card Using CTC
DLP-G386 Provision the Gigabit Ethernet Trunk Port Alarm and TCA Thresholds
DLP-G387 Provision the Gigabit Ethernet Client Port Alarm and TCA Thresholds
DLP-G388 Change the GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Card RMON Thresholds
DLP-G389 Change the Gigabit Ethernet Optical Transport Network Settings
DLP-G453 Change the OTU2_XP Card Settings
DLP-G454 Change the OTU2_XP Line Settings
DLP-G455 Change the OTU2_XP Line Section Trace Settings
DLP-G456 Change the OTU2_XP Line Thresholds for SONET or SDH Payloads
DLP-G457 Provision the OTU2_XP Port Alarm and TCA Thresholds
DLP-G462 Change the OTU2_XP Line RMON Thresholds for the 10G Ethernet and 10G FC Payloads
78-19286-01
7-206
7-208
Cards
7-230
CTC
7-231
CTC
7-239
7-239
GE_XPE, or 10GE_XPE Cards Using CTC
7-254
7-255
7-205
7-209
7-209
7-218
7-220
7-241
7-258
7-262
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
Contents
7-212
7-223
7-224
7-226
7-227
7-228
7-228
7-232
7-234
7-236
7-243
7-244
7-245
7-247
7-250
7-260
7-264
lxix