Cisco ONS 15454 Series Procedure Manual page 89

Install the Cisco ONS 15454 Shelf Assembly
This chapter explains how to install the Cisco ONS 15454 ETSI and Cisco ONS 15454 ANSI shelf
assemblies. Where procedures differ for the two shelf types, the procedure will indicate "ANSI only" or
"ETSI only." For a summary of the tools and equipment required for installation, see the
and Equipment (ETSI)" section on page 1-5
page
Note Unless otherwise specified, "ONS 15454" refers to both ANSI and ETSI shelf assemblies.
Note The ONS 15454 installations are suitable for Network Telecommunication facilities and locations where
NEC are applicable.
Before You Begin
This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs). Read
the installation procedures and precautions before you install the ONS 15454 ANSI or ONS 15454 ETSI
and connect the power source.
1.
2.
3.
4.
5.
6.
78-19286-01
1-3.
NTP-G305 Unpack and Inspect the ONS 15454 Shelf Assembly, page
procedure before continuing with the
procedure on page 1-8.
NTP-G306 Install the ONS 15454 Shelf Assembly, page
shelf assembly in a rack.
NTP-G3 Open and Remove the Front Door, page
equipment before continuing with other procedures in this chapter.
NTP-G4 Open and Remove the FMEC Cover (ETSI Only), page
access the electrical facility connection assembly (EFCA) for the front mount electrical connections
(FMECs) before continuing with other procedures in this chapter.
NTP-G5 Remove the Backplane Covers (ANSI Only), page
access the backplane before continuing with other procedures.
NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only), page
procedure to install the MIC-A/P and MIC-T/C/P FMECs, which are required for power supply as
well as alarm, timing, and LAN connections.
C H A P T E R
or the "Required Tools and Equipment (ANSI)" section on
"NTP-G306 Install the ONS 15454 Shelf Assembly"
1-8—Complete this procedure to install the
1-22—Complete this procedure to access the
1-29—Complete this procedure to
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
1
"Required Tools
1-7—Complete this
1-26—Complete this procedure to
1-31—Complete this
1-1