Cisco ONS 15454 Series Procedure Manual page 55

NTP-G82 Customize the CTC Network View
NTP-G83 Modify or Delete Card Protection Settings
NTP-G84 Initiate and Clear Y-Cable and Splitter External Switching Commands
NTP-G85 Modify or Delete OSC Terminations, GCC Terminations, and Provisionable Patchcords
NTP-G86 Convert a Pass-Through Connection to Add/Drop Connections
NTP-G87 Change Node Timing Parameters
NTP-G88 Modify Users and Change Security
NTP-G89 Change SNMP Settings
NTP-G231 View Optical Power Values and Alarms Using the Network Functional View
NTP-G90 Modify OSCM and OSC-CSM Card Line Settings and PM Thresholds
NTP-G91 Modify OPT-PRE and OPT-BST Card Line Settings and PM Thresholds
NTP-G160 Modify OPT-AMP-L, OPT-AMP-17-C, OPT-AMP-C, OPT-RAMP-C, and OPT-RAMP-CE Card Line
NTP-G202 Modify PSM Card Line Settings and PM Thresholds
NTP-G175 Modify 32MUX-O, 32DMX-O, 32DMX, 32DMX-L, 40-MUX-C, 40-DMX-C, 40-DMX-CE, and 4MD-xx.x
NTP-G93 Modify the 32WSS, 32WSS-L, 40-WSS-C, or 40-WSS-CE Line Settings and PM Thresholds
NTP-G240 Modify TDC-CC and TDC-FC Line Settings and PM Thresholds
NTP-G174 Modify the 40-WXC-C or 80-WXC-C Line Settings and PM Thresholds
NTP-G241 Modify the 40-SMR1-C and 40-SMR2-C Line Settings and PM Thresholds
NTP-G149 Modify the MMU Line Settings and PM Thresholds
NTP-G101 Modify Alarm Interface Controller–International Settings
NTP-G102 Change Card Service State
NTP-G280 Modify Threshold Settings for the TNC Card
NTP-G107 Remove Permanently or Remove and Replace DWDM Cards
NTP-G127 Add an AD-xC-xx.x Card to an OADM Node
NTP-G129 Add a DWDM Node
NTP-G130 Remove a DWDM Node
NTP-G146 Add a Rack, Passive Unit, or Shelf to a Multishelf Node
NTP-G147 Delete a Passive Unit, Shelf, or Rack from a Multishelf Node
NTP-G173 Convert an OADM Node to a ROADM Node
NTP-G176 Convert an Line Amplifier Node to an OADM Node
NTP-G182 Convert a Line Amplifier Node to a ROADM Node
NTP-G195 Convert a Protected ROADM Node from two Separate Nodes to a Single Multishelf Node
NTP-G177 Upgrade ANS Parameters on a DWDM Node
NTP-G242 Modify the CD setting of TDC-CC and TDC-FC Cards
78-19286-01
12-30
12-52
12-53
12-66
Settings and PM Thresholds
Line Card Settings and PM Thresholds
13-117
14-9
14-11
12-39
12-50
13-27
13-44
13-51
13-73
13-111
13-114
13-118
14-2
14-6
14-13
14-15
14-17
14-20
14-22
14-31
14-32
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
Figures
12-42
12-47
12-68
13-2
13-13
13-62
13-76
13-91
14-24
lv