Cisco ONS 15454 Series Procedure Manual page 68

Tasks
DLP-G666 Change the 40G Data Muxponder Line Settings
DLP-G667 Change the 40G Data Muxponder SONET (OC-192)/SDH (STM-64) Settings
DLP-G668 Change the 40G Data Muxponder Section Trace Settings
DLP-G669 Change the 40G Data Muxponder SONET or SDH Line Thresholds
DLP-G670 Change the 40G Data Muxponder Line RMON Thresholds for Ethernet, 8G FC, or 10G FC
DLP-G671 Provision the 40G Data Muxponder Trunk Port Alarm and TCA Thresholds
DLP-G672 Provision the 40G Data Muxponder Client Port Alarm and TCA Thresholds
DLP-G673 Change the 40G Data Muxponder OTN Settings
DLP-G611 Create a Channel Group Using CTC
DLP-G612 Modify the Parameters of the Channel Group Using CTC
DLP-G613 Add or Remove Ports to or from an Existing Channel Group Using CTC
DLP-G614 Delete a Channel Group Using CTC
DLP-G615 Retrieve Information on Channel Group, REP, CFM, and EFM Using CTC
DLP-G616 View Channel Group PM Parameters for GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards Using
DLP-G617 View Channel Group Utilization PM Parameters for GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards
DLP-G618 View Channel Group History PM Parameters for GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards
DLP-G621 Enable or Disable CFM on the Card Using CTC
DLP-G622 Enable or Disable CFM for Each Port Using CTC
DLP-G623 Create a Maintenance Domain Profile Using CTC
DLP-G624 Delete a Maintenance Domain Profile Using CTC
DLP-G625 Create a Maintenance Association Profile Using CTC
DLP-G626 Modify a Maintenance Association Profile Using CTC
DLP-G627 Delete a Maintenance Association Profile Using CTC
DLP-G628 Map a Maintenance Association Profile to a Maintenance Domain Profile Using CTC
DLP-G629 Create a MEP Using CTC
DLP-G630 Delete a MEP Using CTC
DLP-G631 Create a MIP Using CTC
DLP-G632 Delete a MIP Using CTC
DLP-G633 Ping MEP Using CTC
DLP-G634 Traceroute MEP Using CTC
DLP-G639 Enable or Disable EFM for Each Port Using CTC
DLP-G640 Configure EFM Parameters Using CTC
DLP-G641 Configure EFM Link Monitoring Parameters Using CTC
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
lxviii
Payloads
7-165
7-178
7-184
CTC
7-186
Using CTC
7-186
Using CTC
7-187
7-196
7-197
7-197
7-198
7-199
7-199
7-158
7-161
7-173
7-179
7-189
7-190
7-191
7-192
7-192
7-193
7-194
7-201
7-202
7-203
7-160
7-163
7-169
7-170
7-183
7-185
7-195
78-19286-01