Figure 1-19 Replace Backplane Screws With Standoffs - Cisco ONS 15454 Series Procedure Manual

Required Tools and Equipment (ETSI)
Figure 1-19
Longer
Step 2 Attach the remaining two standoffs on either side of the backplane
Position the AEP board over the standoffs.
Step 3
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
1-46
Replace Backplane Screws with Standoffs
Shorter
Chapter 1 Install the Cisco ONS 15454 Shelf Assembly
(Figure 1-20).
78-19286-01