Cisco ONS 15454 Series Procedure Manual page 59

DLP-G676 Unpack and Verify the ONS 15454 Shelf Assembly
DLP-G677 Inspect the ONS 15454 Shelf Assembly
DLP-G3 Reverse the Mounting Bracket to Fit a 19-inch (482.6-mm) Rack (ANSI Only)
DLP-G4 Install the External Brackets and Air Filter (ANSI Only)
DLP-G678 Mount the ONS 15454 Shelf Assembly in a Rack (One Person)
DLP-G679 Mount the ONS 15454 Shelf Assembly in a Rack (Two People)
DLP-G680 Mount Multiple ONS 15454 Shelf Assemblies in a Rack
DLP-G8 Install the Air Ramp
DLP-G9 Open the Front Cabinet Compartment (Door)
DLP-G10 Remove the Front Door
DLP-G11 Open the FMEC Cover
DLP-G12 Remove the FMEC Cover
DLP-G13 Remove the Lower Backplane Cover
DLP-G14 Remove the Backplane Sheet Metal Cover
DLP-G17 Connect Office Power to the ONS 15454 ETSI
DLP-G18 Connect Office Power to the ONS 15454 ANSI
DLP-G19 Turn On and Verify Office Power
DLP-G20 Install Alarm Wires on the MIC-A/P (ETSI Only)
DLP-G21 Install Timing Wires on the MIC-C/T/P (ETSI Only)
DLP-G22 Install LAN Wires on the MIC-C/T/P (ETSI Only)
DLP-G23 Install Alarm Wires on the Backplane (ANSI Only)
DLP-G24 Install Timing Wires on the Backplane (ANSI Only)
DLP-G25 Install LAN Wires on the Backplane (ANSI Only)
DLP-G26 Install the TL1 Craft Interface Wires (ANSI Only)
DLP-G27 Install the DCU Shelf Assembly
DLP-G28 Install the Fiber Patch-Panel Tray
DLP-G29 Install the Fiber-Storage Tray
DLP-G371 Install the Ethernet Adapter Panel
DLP-G352 Install the Y-Cable Module Tray
DLP-G30 Install the FlexLayer Shelf
DLP-G31 Install the FlexLayer Modules
78-19286-01
T A S K S
1-8
1-19
1-23
1-24
1-27
1-28
1-29
1-30
1-39
1-67
1-68
1-68
1-69
1-70
1-70
1-71
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
1-7
1-12
1-13
1-15
1-16
1-35
1-37
1-49
1-52
1-53
1-54
1-56
1-57
1-58
1-10
lix