Cisco ONS 15454 Series Procedure Manual page 15

NTP- G199 Create a Splitter Protection Group for the OTU2_XP Card
NTP- G198 Create 1+1 Protection for GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards
NTP- G98 Provision the 2.5G Multirate Transponder Card Line Settings and PM Parameter
Thresholds
NTP- G96 Provision the 10G Multirate Transponder Card Line Settings, PM Parameters, and
Thresholds
NTP- G170 Provision the ADM-10G Card Peer Group, Ethernet Settings, Line Settings, PM Parameters,
and Thresholds
78-19286-01
DLP- G461 Create a 1+1 Protection Group for GE_XP, 10GE_XP, GE_XPE, or 10GE_XPE Cards
7-27
DLP- G229 Change the 2.5G Multirate Transponder Card Settings
DLP- G230 Change the 2.5G Multirate Transponder Line Settings
DLP- G231 Change the 2.5G Multirate Transponder Line Section Trace Settings
DLP- G367 Change the 2.5G Multirate Transponder Trunk Wavelength Settings
DLP- G232 Change the 2.5G Multirate Transponder SONET or SDH Line Threshold Settings
DLP- G320 Change the 2.5G Multirate Transponder Line RMON Thresholds for 1G Ethernet or 1G
FC/FICON Payloads
7-37
DLP- G305 Provision the 2.5G Multirate Transponder Trunk Port Alarm and TCA Thresholds
DLP- G306 Provision the 2.5G Multirate Transponder Client Port Alarm and TCA Thresholds
DLP- G234 Change the 2.5G Multirate Transponder OTN Settings
7-47
DLP- G365 Provision the TXP_MR_10G Data Rate
DLP- G216 Change the 10G Multirate Transponder Card Settings
DLP- G217 Change the 10G Multirate Transponder Line Settings
DLP- G218 Change the 10G Multirate Transponder Line Section Trace Settings
DLP- G368 Change the 10G Multirate Transponder Trunk Wavelength Settings
DLP- G219 Change the 10G Multirate Transponder Line Thresholds for SONET or SDH Payloads
Including 10G Ethernet WAN Phy
DLP- G319 Change the 10G Multirate Transponder Line RMON Thresholds for 10G Ethernet LAN Phy
Payloads
7-60
DLP- G301 Provision the 10G Multirate Transponder Trunk Port Alarm and TCA Thresholds
DLP- G302 Provision the 10G Multirate Transponder Client Port Alarm and TCA Thresholds
DLP- G221 Change the 10G Multirate Transponder OTN Settings
7-72
DLP- G403 Create the ADM-10G Peer Group
DLP- G469 Provision the ADM-10G Card Ethernet Settings
DLP- G397 Change the ADM-10G Line Settings
DLP- G398 Change the ADM-10G Line Section Trace Settings
DLP- G399 Change the ADM-10G Line Thresholds for SONET and SDH Payloads
DLP- G412 Change the ADM-10G Line RMON Thresholds for the 1G Ethernet Payload
DLP- G400 Provision the ADM-10G Interlink or Trunk Port Alarm and TCA Thresholds
DLP- G401 Provision the ADM-10G Client Port Alarm and TCA Thresholds
DLP- G402 Change the ADM-10G OTN Settings
7-48
7-57
7-73
7-74
7-74
7-90
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
Contents
7-23
7-25
7-28
7-29
7-32
7-33
7-44
7-49
7-51
7-54
7-56
7-67
7-80
7-81
7-85
7-87
7-89
7-26
7-34
7-38
7-40
7-64
7-65
xv