Figure 1-10 Removing The Ons 15454 Etsi Front Door - Cisco ONS 15454 Series Procedure Manual

Chapter 1 Install the Cisco ONS 15454 Shelf Assembly
b. Remove the ground wire from the shelf.
c. Hold the door at the top left corner and remove the door from its hinges
Figure 1-10
Assembly hinge pin
Assembly hinge
For ONS 15454 ANSI shelves:
Step 2
To remove the door ground strap, perform the following:
a.
Lift the door from its hinges at the top left corner of the door
b.
78-19286-01
Removing the ONS 15454 ETSI Front Door
Translucent
circles
for LED
viewing
Door hinge
• To detach the ground strap from the front door, loosen the #6 Kepnut (49-0600-01) using the
open-end wrench. Detach the end of the ground strap terminal lug (72-3622-01) from the male
stud on the inside of the door.
• To detach the other end of the ground strap from the longer screw on the fiber guide, loosen the
#4 Kepnut (49-0337-01) on the terminal lug using the open-end wrench. Remove the terminal
lug and lock washer.
F A N
F A IL
C R
IT
M A
J
M IN
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
Required Tools and Equipment (ETSI)
(Figure 1-10).
(Figure 1-11).
1-25