Chapter 3 Installation
Connecting the AC Power to the D9859 Transcoder
1
Connect the power cord (supplied with the D9859 transcoder) between the rear
panel power receptacle and a 100 to 120/200 to 240 V AC power outlet.
2
Make sure that the power cable is connected to protective ground. See for
Grounding (on page 21) more information.
The D9859 transcoder is equipped with one power supply located in the rear of the
chassis. Note the location of the power supply in the event of alarms/warnings
resulting in replacement of a power supply. Alarm messages appear in the Mes sage
Log.
22
OL-31980-01