Warnings - Cisco D9859 Installation And Configuration Manual

Alarm Message
Type
Disaster Set
Declared
Disaster Reset
Declared

Warnings

Warning Message
Type
Transcoding Set
Condition
Transcoding Set
Condition
Transcoding Set
Condition
OL-31980 -01
Message Cause/Remedy
Disaster declared Cause: One or
more of the
following is
detected: RF lock
loss, unstable RF
signal, and/or
transport loss (RF
locked, but no
transport stream
packet received)
Remedy: A valid
signal.
No disaster –
Message Cause/Remedy
Transcoding Cause: Possible software
Error: Decoder
issue.
timeout
Remedy: Clear alarms,
reset the unit, and notify
Cisco customer support
if the problem persists.
Transcoding Cause: Possible software
Error: Encoder issue.
Remedy: Clear alarms,
reset the unit, and notify
Cisco customer support
if the problem persists.
Transcoding Cause: Possible software
Error: Encoder
issue.
timeout
Remedy: Clear alarms,
reset the unit, and notify
Cisco customer support
if the problem persists.
Description Severity
A disaster is Major
detected.
Disaster Major
recovery
feature is
cleared with a
valid signal.
Description
The transcoder has
lost connection with
the decoder.
The transcoder
encoder encountered
an error.
The transcoder has
lost connection with
the encoder.
ID
98000
98000
ID
39500
39500
39500
299