Modules - Cisco D9859 Installation And Configuration Manual

Chapter 5 Web GUI Setup and Monitoring

Modules

You can customize the Summary Dashboard by temporarily minimizing or
removing the modules displayed. Each module has a maximize and minimize
button, allowing you to view or hide various modules. The default view is displayed
when you refresh the Summary Dashboard page.
You can also customize the Dashboard by clicking Add/Remove Module. The
Dashboard Configuration window is displayed.
The following table describes all the available modules:
Module
Decoded Program Status
Audio Status
Current Input Status
Tuner Performance
Video Status
Channel Status
PID Information
Fault Active List
136
Description
Displays channel and service information.
Displays the current audio status information, such as
the audio format and sampling frequency.
Displays the current RF Tuning Status information,
including the downlink frequency and signal status.
Displays the satellite dish status, such as the C/N
Margin and Signal Level.
Displays the current video information.
Displays the channel status information, such as the
type of CA used and whether the receiver is
authorized to receive the signal.
Displays the PIDs associated with the channels.
Displays the currently active alarms and warnings.
OL-31980-01