Cisco D9859 Installation And Configuration Manual page 134

Chapter 4 Front Panel Operation
Transcode
Menu Item
PE
Video Mode
HD HRes
SD HRes
HD/SD B/R Mode
HD Bitrate
110
Description
This selects the transcoder
index as referenced by DPM.
This selects the transcode
channel video mode.
This selects the transcode
channel HD horizontal output
video resolution.
This selects the transcode
channel SD horizontal output
video resolution.
This selects the transcode
channel output bit rate mode.
This sets the transcode channel
output bit rate when HD
MPEG-4/ AVC to HD MPEG-2
transcoding is selected.
Parameters
1 to 8
Auto - Leaves the input video
format and resolution unchanged.
e.g., SD in - SD out, HD in - HD
out.
SD Output - Down-converts from
HD to SD when receiving an HD
input signal. SD horizontal
resolution will follow the SD Res
parameter set on this menu.
HD Output - Up-converts from SD
to HD1080i when receiving an SD
input signal. HD horizontal
resolution will follow the HD Res
parameter on this menu.
HD720p - Sets the output vertical
resolution to HD720p regardless of
the input resolution.
HD1080i - Sets the output vertical
resolution to HD1080i, regardless
of the input resolution.
Full or 3/4
Setting Description
Input Output
Resolutio
Resolution
n
Full 1080i 1920
3/4 1080i 1440
Full 720p 1280
3/4 720p 960
352, 480, 528, 544, 704, or 720
CBR or VBR
8 to 25 Mb/s in 400 b/s
increments. The default is 16.0
Mb/s.
OL-31980-01