Setting Up The Channel Selections - Cisco D9859 Installation And Configuration Manual

Setting up the Channel Selections

1 From the user interface of the D9859, choose Input > Channel Selection. The
Channel Selection page is displayed.
2 Enter or select a channel number for up to eight program entries.
3 Click Apply.
If a disaster recovery is in progress, a message is displayed, recommending that
you do not apply the setup changes during a disaster recovery.
Click Close. If you want to save your changes during a disaster recovery, click
Apply again. The warning message is displayed again. Click OK to confirm your
changes. The changes are saved.
OL-31980 -01
Setting up Input Information
159