Cisco D9859 Installation And Configuration Manual page 200

Chapter 5 Web GUI Setup and Monitoring
Audio Status
DDP Mode
Dualmono Mode
Click List Audio PIDs to view a list of all the current audio PIDs.
The following table describes the Audio PIDs information:
Audio Status
Type
Detail
Language
PID
Present
176
Description
Displays the presence of Dolby Digital Plus frames within a Dolby
Digital audio stream (ON or OFF).
Indicates the presence of dual mono audio outputs in the audio
stream (ON or OFF).
Description
Displays the input audio source (AUD1 or AUD2)
Indicates any detail associated with the audio PID. The parameters
are: MPG1 VID, MPG2 VID, 422 VID, H264 VID, HD VID, MPG4
VID, MPG AUD, MPG2 AUD, DVB AC3, DVB DDP, AAC AUD,
HEAAC, AUD, MPG4 AUD, DBE AUD, DTS AUD, DVB TXT, DVB
VBI, DVB SUBT, DVB ASYN, DVB SYNS, DVB SYND, DVB MPE,
DVB DCAR, DVB OCAR, SA VBI, ATSC AC3, ATSC DDP, SA
UTLD, SCTE DPI, SA HSD, SA CDDL, SA WBD, SA SUBT, ECM,
EMM, PCR, or UNKNOWN.
Displays the language code of the audio PID, if applicable.
Indicates the audio PID number, in the range from 1 to 8192.
Indicates whether the audio PID is present in the incoming stream
(Yes or No).
OL-31980-01