Cisco D9859 Installation And Configuration Manual page 325

Warning Message
Type
Transcoding Clear
Condition
Transcoding Clear
Condition
ASI TS Set
Overflow
ASI TS Clear
Overflow
Transport Error Set
Transport Error Set
OL-31980 -01
Message Cause/Remedy
Transcoding –
config
operational
Transcoding –
operational
ASI Output Cause: Uplink settings
may have changed since
Overflow
setting up the unit.
Variable bit rate or
statmuxed streams may
be in use.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and drop
the programs that are
not needed for
downstream devices.
Contact your (uplink)
service provider to
verify the expected bit
rate settings.
ASI Output –
Overflow
Cleared
Continuity Count Cause: Possible uplink
Error or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
customer support if the
problem persists.
Buffer Overflow Cause: Possible uplink
or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
customer support if the
problem persists.
Description
–
–
The output rate is
higher than level set
by the user.
–
Transport packet
continuity count
jumped. Possible
packet loss.
The transport stream
is faster than the
maximum buffer or
the decode engines are
having difficulty
handling the data sent
to them.
ID
39500
39500
40000
40000
42000
42000
301