Cisco D9859 Installation And Configuration Manual page 238

Chapter 5 Web GUI Setup and Monitoring
Setting
SD Output
HD Output
4 The Remaining Transcoders field displays the remaining HD or SD licenses
available to transcode on the unit. The number of resources available is updated
automatically when you choose HD Output or SD Output as the Transcoder
Output.
Configuring Transcoder Settings
Select the channel channel you want to configure settings and click Transcoder
Config. The Transcoder Settings window is displayed.
If the selected channel is set to HD Output, proceed as follows:
1 In the HD Settings column, choose the transcode channel HD horizontal output
video resolution from the HRes drop-down list. You can select Full or 3/4. The
following table displays the settings:
214
Description
Down-converts from HD to SD when
receiving an HD input signal. SD horizontal
resolution will follow the HRes parameter
set in the SD Settings column of the
Transcoder Settings window (click
Transcoder Config).
Up-converts from SD to HD1080i when
receiving an SD input signal. HD horizontal
resolution will follow the HRes parameter
set in the HD Settings column of the
Transcoder Settings window (click
Transcoder Config).
OL-31980-01