Setting Up For Network Connection - Cisco D9859 Installation And Configuration Manual

Chapter 2 Quick Setup - Read Me First!

Setting up for Network Connection

1 Press MENU to display the Main menu.
2 If the Advanced Receiver Transcoder is to be connected to a network, press
move to the Setup menu. Press SELECT. Press
Press SELECT twice to go to the IP menu.
3 Use the
keys to move across the IP menu to set the IP Address, Mask and Gateway
parameters. Use the number keys to directly enter numbers in the fields. For
more information on keypad operation, see Keypad (on page 34).
4 Press SELECT each time to save the changes. Press MENU four times to return
to the startup screen.
12
arrow keys to navigate up and down the IP menu, and the
twice to select the IP menu.
to
arrow
OL-31980-01