Cisco D9859 Installation And Configuration Manual page 71

Menu Item
Stream AR
Act Conv
Audio
Menu Item
AUD
Format
BR (Kbps)
Buffer
SFR (KHz)
DDP IND
DUAL-MONO IND
Status Menu: TS Input
Input
Menu Item
Input
OL-31980 -01
Description
Indicates the aspect ratio of the
incoming video stream.
Displays the actual applied aspect
ratio conversion.
Description
Indicates the current audio decoder
status.
Indicates the format of the audio
input stream.
Indicates the bit rate of the audio
input stream, in kbps.
Indicates the buffer level of the input
audio stream, in bytes.
Indicates the sample rate of the input
audio stream, in kHz.
Indicates the presence of Dolby
Digital Plus frames within a Dolby
Digital Plus audio stream.
Indicates the presence of dual mono
audio outputs in the audio stream. If
the dual mono indicator is set to ON,
the left and right outputs will
correspond to mono channel 1 and
mono channel 2 respectively.
Description
Indicates the active input port receiving
the signal.
Parameters
4:3, 14:9 or 16:9
None, 4:3 L/B, 4:3 P/B, 14:9, 14:9,
4:3 F/H or 16:9 F/W
Parameters
AUD1 for audio channel Aud1.
AUD2 for audio channel Aud2.
AUD1 to AUD4 for two stereo
audio channels.
None, Sine, Pink, Beep, MPEG1L1,
MPEG1L2, MPEG2L1, MPEG2L2,
AC3, LOAS AAC, ADTS AAC,
LOAS HEAAC, ADTS HEAAC, or
DDP
32.0, 44.1, or 48.0 kHz
OFF or ON
®
OFF or ON
Parameters
RF1, RF2, RF3, RF4, or ASI
Status Menu
47