Cisco D9859 Installation And Configuration Manual page 287

Alarm Message
Type
Signal Status Set
Signal Status Set
Signal Status Set
Signal Status Clear
Signal Status Clear
Transcoder Set
Status
OL-31980 -01
Message Cause/Remedy
RF Signal - No Cause: Loss of
ASI/RF lock. Loss
Content
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
Signal is lost Cause: Loss of
ASI/RF lock. Loss
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
Tuning Cause: Loss of
Parameters ASI/RF lock. Loss
of Transport data.
Invalid
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
Signal is locked –
Tuning –
Parameters Valid
Transcode Not Cause: Possible
Started: Restart hardware or
Timeout software fault.
Remedy: Clear all
alarms, reset the
unit, and notify
Cisco customer
support if the
problem persists.
Description Severity
RF Tuner Minor
locked, but no
TS content.
Loss of signal Minor
One of the Minor
tuning
parameters is
invalid
Signal OK Minor
Tuning Minor
parameters are
valid
No response Major
was received
from the
transcoder
during the boot
process.
ID
1000
1000
1000
1000
1000
1500
263