Cisco D9859 Installation And Configuration Manual page 185

Parameter
SR Status
SR Type
SR Start/End Time
OL-31980 -01
Description
Displays the status of an alternate authorized program/service
from the same transport stream when the transcoder is not
authorized to view the primary program. This is an uplink
initiated function that maps the alternate service to the original
(primary) service PIDs, replacing the original service with the
alternate service at the digital transport output. No local
intervention is required by the transcoder operator for provision
of this service replacement feature. The statuses are Not Started,
Primary, or Alternate.
Not Started - Indicates that an event has not started.
Primary - Indicates that a service replacement event is active, but
the primary program is being displayed.
Alternate - Indicates that a service replacement event is active, and
that the transcoder has tuned to and is displaying the alternate
program/event as it is not authorized to view the scheduled
event.
Indicates the type of service replacement event. The types are
None, Scheduled, CA, Cue Trigger
None - Indicates that no service replacement event is scheduled.
Scheduled - Indicates that all transcoders will tune to the alternate
program at the scheduled time. This status applies to PE1 to PE8.
CA - Indicates that only transcoders unauthorized to view the
scheduled program will tune to the alternate program according
to the selected authorization tier bits. This status applies to PE1 to
PE8.
Cue Trigger - Indicates that only transcoders authorized by the
Cue Trigger mask will tune to the scheduled program/event.
Note: The Cue Trigger service replacement event type is not
supported in the current release.
Displays the start/end time of the service replacement event when
one is scheduled; otherwise, the default start/end time is
displayed. The default start/end time is 2007/09/01 00:00:00.
Setting up Input Information
161