Table of Contents
Advertisement
2
Select PE Resync: All. The receiver will synchronize the PE output according to
the services and then the PIDs assigned to each service.
To synchronize the output to a Template:
Using a template allows you to preset the input to output mapping of a PE according
to the preset template. This is helpful in pre-configuring any number of PEs for
future use.
TS Out - Transcode
To view the Transcode menu from the TS Out menu, press the RIGHT arrow key
three times.
The Transcode menu allows you to convert MPEG-4 HD services to MPEG-2 for use
in CATV headends. Video and two audio monitoring outputs are available for
confidence monitoring of the decrypted incoming MPEG-4 HD program.
The Transcode menu has the following structure:
OL-31980 -01
Setup Menu
109
Hide quick links:
Advertisement
Table of Contents
