Cisco D9859 Installation And Configuration Manual page 78

Chapter 4 Front Panel Operation
Global Status
Menu Item
State
Signal Loss Timer
Signal Lock Timer
Verify Timer
Backup Channel Status
Menu Item
PE
Backup Channel
Transport #
Backup Transport Status
Menu Item
Backup
54
Description
Displays the current disaster recovery status. The
three statuses are:

No Disaster - The unit is in a normal state.

D/R In Progress - The unit has detected a loss
of input and it is searching for a backup
transport using the configured search path.
The configured search path is displayed in the
Transport Status menu.

D/R Disabled - The disaster recovery feature is
temporarily disabled. To enable disaster
recover, see Setup Menu: DR (on page 121).
Indicates the time, in seconds, the unit must wait
(after detecting a signal loss) before declaring a
disaster.
Indicates the time, in seconds, the unit must wait
for a signal lock before declaring that the signal is
not usable and move on to the next search location
in the search path.
Indicates the time, in seconds, the unit must wait
for the PAT table to verify the signal has a valid
transport.
Description
Displays the program entry.
Displays the channel number assigned to the
selected backup transport.
Displays the backup transport number for the
program entry selected.
Description
Indicates the configured backup transport entry
number.
Parameters
No Disaster, D/R In
Progress, D/R Disabled
5 to 2160000
5 to 255
10 to 255
Parameters
PE1 to PE8
–
1, 2, or 3
Parameters
1, 2, or 3
OL-31980-01