Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Configuring the DPM ASI Details
Note: The following procedure defines all the available fields. For a typical setup of
the DPM, see Typical set up for Digital Program Mapping (DPM) (on page 210).
Note: After you make any changes, a successfully updated (session open) message
appears. The changes are displayed, but not saved. You must click Apply to save
and apply the changes.
1
From the user interface of the D9859, choose Transport Stream > Digital
Program Mapping. The ASI Digital Program Mapping page is displayed.
2
For each DPM Program Entry, it displays the input channel number (Chl #) and
channel Name.
There are eight channels (PE1 to PE8), with eight a uxiliary channels (PE1A to
PE8A). The auxiliary channels automatically tune to the corresponding PE
channels. If the main PE is not transcoding, the auxiliary PE is dropped.
Note: Any changes made to the ASI DPM values will automatically change the
Mode Status to Edited by User in the ASI Outputs page.
3
In the table, select the program entry you want to edit the Action setting.
In the Action drop-down list, choose the DPM program action for the PE (Pass,
Map, Drop, or XCode). The auxiliary programs (P1A to P8A) cannot be set to
XCode.
Click Save.
188
OL-31980-01
Hide quick links:
Advertisement
Table of Contents
