Chapter 2 Quick Setup - Read Me First!
Setting up the ASI Output
1
Press MENU to move to the Main Menu.
Press to move to the Setup menu. Press SELECT.
2
Press to move to the Outputs menu. Press SELECT.
3
Press to move to the TS Out menu. Press SELECT.
4
5
Press SELECT to access the ASI menu. Press . Press SELECT. Use
the output mode. The factory default is "No Output". It is recommended to set
the Output Mode to Transcoding.
Press SELECT. Press to select "YES" if requested to "RESYNC ALL?". Press
6
SELECT.
Press to move to Descramble Mode menu. Press SELECT. Use
7
scrambling mode. Press SELECT.
Press to move to Insert Null Packet. Press SELECT. Use
8
mode to Yes. Press SELECT.
9
Press APPLY. Press SELECT.
10 Press MENU five times to return to the startup menu.
16
to select
to select the
to change the
OL-31980-01