Cisco D9859 Installation And Configuration Manual page 73

Menu Item
C/N Margin (dB)
PER
PVBER
LDPCBER
AFC (MHz)
UEC
CEC
Clear Counts
ASI Link
Transport
Packet Size
Net Name
NetID
TxID
LNB Stat
OL-31980 -01
Description
Indicates the current Carrier-to-Noise
Margin for the received signal. The
Carrier-to-Noise margin is the actual
distance that C/N is from the noise
threshold.
Indicates the current PER (Packet Error
Rate) of the received signal (DVB-S2).
Indicates the PV (Post-Viterbi) BER for
the received signal (DVB-S).
Indicates the LDPC (Low Density Parity
Check) error rate for the received signal
(DVB-S2).
Indicates the current Automatic
Frequency Control count.
Indicates the current Uncorrected Error
Count for the received signal.
Indicates the current Corrected Error
Count for the received signal (DVB-S).
Select this option to clear the error
counters.
Indicates whether there is a transport
stream link error.
Indicates the current transport
synchronization status.
Indicates the packet size (in bytes) for
the ASI input.
Indicates the name assigned to the
network.
Indicates the Network ID of the uplink
signal the receiver is to receive when
using the selected preset. The receiver's
Network ID must match the Network
ID associated with the transmitted
signal that identifies the NIT to be used.
Note: Each network must be assigned a
unique ID (number).
Indicates the Transport ID.
Indicates the current Low Noise Block
(LNB) connection status.
Status Menu
Parameters
Values can be displayed in the
range of -32.0 to +30.0 dB.
in MHz
Error, Ok, or N/A
Error, Ok, or N/A
188, 204, or N/A
Up to 12 alphanumeric characters.
1 to 65535
1 to 65535
No Load, Over Loaded, Over
Temperature, Short Circuit,
Disabled, Normal or N/A
49