Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Configuring the Disaster Recovery Settings
The disaster recovery settings allow you to configure the search path when a disaster
occurs. By default, the disaster recovery feature is enabled. For more information on
disaster recovery, see Disaster Recovery (on page 6).
1
From the user interface of the D9859, choose Input > Disaster Recovery. The
Disaster Recovery Setup page is displayed.
2
From the Enable Disaster Recovery drop-down list, choose to enable or
temporarily disable the disaster recovery feature. Choose Yes (default) to enable
disaster recovery. Choose No to set the disaster recovery into maintenance mode.
It will automatically set the Disaster Recovery back to Yes after five minutes.
This prevents the user from accidentally disabling disaster recovery
permanently. To disable disaster recovery, remove all the disaster recovery
configurations (Search Path settings below).
The maintenance mode allows you to perform any maintenance operations (such
as IP setup), without the unit declaring disaster and initiate a disaster recovery
search path.
Note: Although the default is set to Yes, the disaster recovery is not operational
until the Search Path is configured.
154
OL-31980-01
Hide quick links:
Advertisement
Table of Contents
