Table of Contents
Advertisement
Alarm
Message
Type
Transcoder
Set
Status
Transcoder
Set
Status
Transcoder
Set
Status
Transcoder
Set
Status
Transcoder
Clear
Status
OL-31980 -01
Message
Cause/Remedy
Transcode Not
Cause: Possible
Started: Invalid
hardware or
production
software fault.
information
Remedy: Clear all
alarms, reset the
unit, and notify
Cisco customer
support if the
problem persists.
Transcode Not
Cause: Possible
Started:
hardware or
Communication
software fault.
Failure
Remedy: Clear all
alarms, reset the
unit, and notify
Cisco customer
support if the
problem persists.
Transcoder Not
Cause: Possible
hardware or
Detected
software fault.
Remedy: Clear all
alarms, reset the
unit, and notify
Cisco customer
support if the
problem persists.
Lost Contact
Cause: Transcoder
resetting. Possible
With Transcoder
hardware or
software fault.
Remedy: Clear all
alarms, reset the
unit, and notify
Cisco customer
support if the
problem persists.
Transcoder
–
Started
Description
Severity
Transcoder
Major
production
information is
corrupted.
There was an
Major
error
establishing
connection
with the
transcoder.
Messages were
Major
not received
from Transcode
on boot.
Messages were
Major
not received
from
Transcoder
after it
previously
received
messages.
–
Major
ID
1500
1500
1500
1500
1500
265
Hide quick links:
Advertisement
Table of Contents
