Cisco D9859 Installation And Configuration Manual page 138

Chapter 4 Front Panel Operation
Menu Item
Use Inp
Chan/PMT/PIDs
Start
Step
Use Inp Ord
PCR, VID, AUD,
SUBT, VBI, DPI,
MPE, TTX, Data,
LSD, CDT, ETV
114
Description
Set to Yes to use the input
channel numbers, PMT PID
numbers, and/or ES PID
numbers. Otherwise, set to No
to use the Start channel and
channel Step assigned below.
First PE channel to use if the
Use Inp Chan/PMT/PIDs is set
to No.
Offset of the subsequent PE
channel, PE PMT PID, or first
ES PID of subsequent channel
numbers.
Set to Yes to assign the ES PID
according to the incoming PMT
order. Otherwise, set to No to
use reserved PIDs defined
below.
Set the number of PIDs for the
specified streams in one
channel.
Parameters
Yes or No
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
1 to 65535 for Use Inp Chan
1 to 8192 for Use Inp PMT/PIDs
Yes or No
1 to 64
OL-31980-01