Setting Up Input Information; Setting Up The Rf Input - Cisco D9859 Installation And Configuration Manual

Setting up Input Information

Setting up the RF Input

1 From the user interface of the D9859, choose Input > Input Setup. The Input
Setup page is displayed.
2 In the RF Input Selection area, check the Use RF Input check box to activate an
RF input. You can select RF 1 to RF 4 below.
3 Choose UserCfg from the Input Selection to lock to the RF input set by the user.
Choose SW Map to use the orbital position settings to select the RF input. We
recommend that you validate the orbital position for SW Map option.
4 Click the Use RF 1, Use RF 2, Use RF 3, or Use RF 4 radio button to activate an
RF input.
OL-31980 -01

Setting up Input Information

141