Chapter 5 Web GUI Setup and Monitoring
If a disaster recovery is in progress, a message is displayed, recommending that
you do not apply the setup changes during a disaster recovery.
Click Close. If you want to save your changes during a disaster recovery, click
Apply again. The warning message is displayed again. Click OK to confirm your
changes. The changes are saved.
The SI Receive Status area displays all the current SI Receive settings. It also
displays the source of last tuning and the last Preset Number activated. The
Service List From area displays the current settings of the allowed services (BAT,
NIT, SDT, PAT).
150
OL-31980-01