Assigning A Program Channel To A Pe (Program Entry) - Cisco D9854 Installation And Operation Manual

Assigning a Program Channel to a PE (Program Entry)

PE #
PE1 706
RF1
1. At the start-up screen, PE1 is initially displayed.
2. Use the
enter the channel number using the 0 to 9 keys; press SELECT to save the
channel selection.
Important: In addition to ASI out availability on both models, your D9854 will be
configured for either HD-SDI or MOIP output. Please follow the procedure for your
model to configure the outputs.
1-6 Model D9854 Advanced Program Receiver Installation and Operation Guide
Ch #
Channel Name
Freq:12.658 Lvl:-50 Marg:11.6
"#
keys to scroll through the available program channels or directly
s
4021470 Rev D