References For Setup; Solaris Os - Fujitsu ETERNUS LT260 User Manual

Chapter 1 Overview

1.2 References for Setup

1.2 References for Setup
1.2.1

Solaris OS

1.2.1.1 SAS Connection for Solaris OS
The following procedure explains how to connect the LT260 to a Solaris OS server with a SAS connection.
Workflow
Refer
Refer
Refer
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Server Connection-
Making a Check before Starting the Procedure
Check the environment (operating system, backup software, and HBAs) of the server to be
connected to the LT260. In addition, check the precautions before starting the procedure.
-
"1.1 Operating Environment" (page 8)
Setting the LT260
Perform the settings for the LT260.
-
"2.1 Settings for SAS Connections" (page 22)
Setting the Operating System
Make settings for the HBA driver and the device driver.
-
"3.1 Solaris OS" (page 26)
-
"3.1.1 SAS Connections" (page 26)
-
"3.1.3 Device Drivers" (page 28)
Copyright 2019 FUJITSU LIMITED
9
P3AM-8812-07ENZ0